Compact X-Band 200W GaN SSPA

  • Compact and efficient pulsed X-Band 200W GaN SSPA
  • 200W min (+56dBm) peak pulsed power, or
  • 400W min (+53dBm) peak pulsed power
  • >1300MHz Bandwidth
  • 360deg, 6-bit Electronic phase control (via I2C bus)
Diamond Microwave 400W X-Band GaN SSPA

This X-Band 200W GaN SSPA is our flagship high power amplifier. It is a derivative of the DM-X400-02, and is a multi-stage design, stripped down to provide a compact, lightweight (1.5kg), efficient microwave high-power pulsed SSPA

This X-Band 200W GaN SSPA delivers in excess of 200W (+56dBm) at up to 15% duty. The standard output connector is N-type female. Two 200W models are available with subtly different performance, one runs off a 40v supply and the other at 50v, the latter offering the best overall efficiency. A 400W model is also available (DM-X400-04) with the same housing and interfaces and offering up to 400W .  Typically, at 40v the efficiency is better than 20%. The saturated power gain is around 53dB with a 0dBm input. The output and driver stages employ gallium nitride (GaN) power transistors giving state-of-the-art power performance with a power-to-volume ratio we believe to be among the highest in the industry for such products.

Our X-Band 200W GaN SSPA and the X-band 400W GaN SSPA are well suited to a range of radar applications, enabling our customers to use compact and reliable wideband SSPA technology instead of the incumbent traveling-wave tube amplifiers (TWTAs). This amplifier can readily be combined with external combining components to provide power up to 10kW and beyond – the internal phase shifter allows the user to optimise the combining efficiency to get the most out of their system. The design is flexible in layout and architecture with small size, weight and power (SWAP) and can be tailored to meet individual specifications if required. It is also available with an ethernet interface (see DM-X400-02).

This compact SSPA is addressable via an I2C bus which we use to align the amplifier, but this bus can also be used to interrogate the amplifier for internal currents, voltages and temperature. An expert user could be provided with a full set of alignment addresses.

Diamond Microwave Slimline X-Band Power Amplifier

The SSPA provides an alarm to alert the host system when a temperature threshold is exceeded. The alarm condition can be set to shut down the amplifier if maximum operating temperature is exceeded. This model uses industrial-grade components throughout and can be operated up to +85C.

The DM-X200-04 is usually supplied without a heatsink, but a heatsink can be provided if required.

All of our products are continuously being improved, so please contact us for the latest specification as it is subject to change without notice.

Power vs Frequency

Compact Microwave Power from Diamond Microwave

Download Datasheet

DPS-DM-X400-04 20181210